Exterior membrane systems, footing drains, and corrected grading tackle Burns, OR water intrusion at the source, before it ever reaches the interior wall.
A lot of Burns, OR exterior waterproofing failures trace back to a footing drain that was installed without proper slope, which means it never actually moved water the way it was supposed to. We verify slope during installation, not just at design.
Exterior work involves excavation near the foundation, and every crew member is trained and insured for that specific scope.
Weather-dependent scheduling means we plan exterior jobs around Burns, OR's rainy season windows when possible.
Pricing is quoted per linear foot of foundation wall being treated, based on an on-site measurement, not a phone estimate.
We install dimpled membrane rated for below-grade use, paired with a footing drain that ties into your existing or new drainage system.
We scope every Exterior Waterproofing job in person before quoting it, since two properties with the same symptom rarely need the same fix.
This is the most comprehensive Burns, OR waterproofing fix available, addressing the wall itself rather than just managing water after it gets in.
We slope footing drains correctly during installation, since a flat or reverse-sloped drain simply won't move water.
We regrade the perimeter to direct surface water away from the wall, typically paired with downspout extensions.
Window wells collecting water get excavated, fitted with a gravel bed, and tied into the exterior drain system so they stop acting as a funnel toward the foundation.
This is often bundled with grading correction since the two issues usually show up together.
We ask about grading, downspout placement, and where interior water is showing up to narrow down the likely exterior cause.
A technician walks the exterior perimeter, checks grading slope, and identifies where excavation would be needed for a membrane or footing drain fix.
You'll see linear footage, membrane type, and footing drain scope broken out with pricing before any digging starts.
Excavation, membrane installation, and backfill for a typical residential wall section usually take a few days depending on access and weather.
"Membrane and footing drain install took three days but the wall that used to weep every storm has been bone dry since."
— Burns Homeowner
"They found our downspouts were dumping water two feet from the foundation. Extended them and regraded, and that alone made a noticeable difference."
— Burns Customer
"Window well kept flooding every storm. They excavated, added drainage, and resealed the window frame while they were at it."
— Burns Homeowner
"Fast turnaround given how much digging was involved."
— Burns Customer
Interior systems manage water after it enters; exterior systems stop water from reaching the wall in the first place, which is more invasive but often more permanent.
Some disruption is unavoidable near the foundation, but we restore grading and replant where reasonable as part of the scope.
Excavation typically goes down to the footing, which varies by home but is often four to eight feet depending on foundation depth.
Generally yes, since it involves excavation, but it addresses the source of water intrusion rather than managing symptoms after entry.
Yes — grading correction and downspout extension are often standalone fixes that resolve a surprising number of Burns, OR water intrusion issues on their own.
A typical residential wall section with membrane and footing drain work takes a few days depending on access and weather conditions.
Exterior jobs depend on access and weather — call +1-866-476-1348 and we'll confirm scheduling for your specific Burns property.
Zip codes we serve in Burns, OR: 97720
Call now for a free inspection and a flat-rate quote before anything gets worse.
Call +1-866-476-1348© SGP Waterproofing. All rights reserved.
